upright piano
				   		A stringed instrument whose strings are struck by hammers controlled by the keys on a keyboard; its soundboard and strings are arranged vertically.
				
 
					
					
					
						strings 
						Metal wires stretched between two fixed points; the hammers strike them, causing them to vibrate and produce sound.
				  	
 
					
						treble bridge 
						Piece of wood over which the strings in the treble range are stretched; it transmits their vibrations to the soundboard.
				  	
 
					
						keyboard 
						Series of piano keys (52 white and 36 black).
				  	
 
					
						muffler pedal 
						In an upright piano, it lowers the muffler felt; in a grand piano, it prolongs the notes (sostenuto pedal).
				  	
 
					
						damper pedal 
						Pedal that increases the duration of string resonance by keeping the dampers raised.
				  	
 
					
						hitch pin 
						Piece attached to the metal frame; the lower end of the string attaches to it.
				  	
 
					
						bass bridge 
						Piece of wood over which the bass strings are stretched; it transmits their vibrations to the soundboard.
				  	
 
					
					
						soundboard 
						Flat surface that amplifies the string vibrations transmitted by the bridges.
				  	
 
					
						keybed 
						Part of the piano projecting from the case; it supports the keyboard.
				  	
 
					
						soft pedal 
						In the upright piano, it brings the hammers closer to the strings to reduce their impact; in a grand piano, it limits the hammer impact to a section of the string.
				  	
 
					
						pedal rod 
						Piece of wood that connects the pedal to the mechanism.
				  	
 
					
						hammer rail 
						Felt-covered piece where the hammer shank rests when it falls back.
				  	
 
					
						muffler felt 
						Strip of felt that comes between the strings and the hammer heads when the muffler pedal is pressed; it lowers the volume of sound.
				  	
 
					
						tuning pin 
						Piece of wood or metal where the end of the string is attached; it adjusts string tension to obtain the exact tone.
				  	
 
					
						pressure bar 
						Metal bar under which the strings pass, marking the top of the section of vibrating strings.
				  	
 
					
						hammer 
						Piece of wood with a felt-covered end (head) that strikes one or more strings causing them to vibrate.
				  	
 
					
						case 
						Wooden box that encloses the inner workings of the piano and protects them.
				  	
 
					
						key 
						White or black lever pressed by the fingers to trigger a mechanism that causes the hammer to strike one or several strings.
				  	
 
					
						pin block 
						Part in which the tuning pins are anchored.